:ACQuire Commands 8
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 183
:ACQuire:SEGMented:ANALyze
(see page 798)
Command Syntax
:ACQuire:SEGMented:ANALyze
This command calculates measurement statistics and/or infinite persistence over
all segments that have been acquired. It corresponds to the front panel Analyze
Segments softkey which appears in the Segmented Memory menu.
In order to use this command, the oscilloscope must be stopped and in segmented
acquisition mode, with either quick measurements or infinite persistence on.
See Also • ":ACQuire:MODE" on page 181
• ":ACQuire:SEGMented:COUNt" on page 184
• "Introduction to :ACQuire Commands" on page 177
Segmented memory is available on the DSOX1000-Series oscilloscope models that have the
SGM license.
To Next Page
Loading...
Need help?
General
