Keysight Technologies InfiniiVision DSOX1204G User Manual

:FFT Commands 15
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 269
:FFT:VTYPe
(see page 798)
Command Syntax
:FFT:VTYPe <units>
<units> ::= {DECibel | VRMS}
The :FFT:VTYPe command specifies FFT vertical units as DECibel or VRMS.
Query Syntax
:FFT:VTYPe?
The :FFT:VTYPe? query returns the current FFT vertical units.
Return Format
<units><NL>
<units> ::= {DEC | VRMS}
See Also • ":FFT:CENTer" on page 261
• ":FFT:DISPlay" on page 262
• ":FFT:OFFSet" on page 263
• ":FFT:RANGe" on page 264
• ":FFT:REFerence" on page 265
• ":FFT:SCALe" on page 266
• ":FFT:SOURce1" on page 267
• ":FFT:SPAN" on page 268
• ":FFT:WINDow" on page 270

Keysight Technologies InfiniiVision DSOX1204G Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204G
Category	Test Equipment
Language	English