630 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
27 :TRIGger Commands
:TRIGger:TV:POLarity
(see page 798)
Command Syntax
:TRIGger:TV:POLarity
<polarity>
<polarity> ::= {POSitive | NEGative}
The :TRIGger:TV:POLarity command sets the polarity for the TV trigger.
Query Syntax
:TRIGger:TV:POLarity?
The :TRIGger:TV:POLarity? query returns the TV trigger polarity.
Return Format
<polarity><NL>
<polarity> ::= {POS | NEG}
See Also • "Introduction to :TRIGger Commands" on page 585
• ":TRIGger:MODE" on page 594
• ":TRIGger:TV:SOURce" on page 631
To Next Page
Loading...
