Keysight Technologies InfiniiVision DSOX1204G User Manual

Status Reporting 33
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 773
Trigger Event Register (TER)
This register sets the TRG bit in the status byte when a trigger event occurs.
The TER event register stays set until it is cleared by reading the register or using
the *CLS command. If your application needs to detect multiple triggers, the TER
event register must be cleared after each one.
If you are using the Service Request to interrupt a program or controller operation,
you must clear the event register each time the trigger bit is set.

Keysight Technologies InfiniiVision DSOX1204G Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204G
Category	Test Equipment
Language	English