276 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
16 :FRANalysis Commands
:FRANalysis:ENABle
(see page 798)
Command Syntax
:FRANalysis:ENABle <setting>
<setting> ::= {{0 | OFF} | {1 | ON}}
The :FRANalysis:ENABle command turns the Frequency Response Analysis (FRA)
feature on or off.
Query Syntax
:FRANalysis:ENABle?
The :FRANalysis:ENABle? query returns a flag indicating whether the Frequency
Response Analysis (FRA) feature is on or off.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also • ":FRANalysis:DATA" on page 275
• ":FRANalysis:FREQuency:STARt" on page 279
• ":FRANalysis:FREQuency:STOP" on page 280
• ":FRANalysis:RUN" on page 281
• ":FRANalysis:SOURce:INPut" on page 282
• ":FRANalysis:SOURce:OUTPut" on page 283
• ":FRANalysis:WGEN:LOAD" on page 286
• ":FRANalysis:WGEN:VOLTage" on page 287
To Next Page
Loading...
