:WGEN Commands 29
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 693
:WGEN:OUTPut:POLarity
(see page 798)
Command Syntax
:WGEN:OUTPut:POLarity <polarity>
<polarity> ::= {NORMal | INVerted}
The :WGEN:OUTPut:POLarity command specifies whether the waveform generator
output is inverted..
Query Syntax
:WGEN:OUTPut:POLarity?
The :WGEN:OUTPut:POLarity? query returns the specified output polarity.
Return Format
<polarity><NL>
<polarity> ::= {NORM | INV}
See Also • "Introduction to :WGEN Commands" on page 671