162 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
6 Root (:) Commands
:STATus
(see page 798)
Query Syntax
:STATus? <source>
<source> ::= {CHANnel<n> | FUNCtion | MATH | SBUS{1} | FFT
| WMEMory<r> | ABUS}
<n> ::= 1 to (# analog channels) in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :STATus? query reports whether the channel, function, or serial decode bus
specified by <source> is displayed.
Return Format
<value><NL>
<value> ::= {1 | 0}
See Also • "Introduction to Root (:) Commands" on page 135
• ":BLANk" on page 142
• ":CHANnel<n>:DISPlay" on page 207
• ":FUNCtion:DISPlay" on page 292
• ":WMEMory<r>:DISPlay" on page 704
• ":VIEW" on page 165
MATH is an alias for FUNCtion.
To Next Page
Loading...
Need help?
General
