Root (:) Commands 6
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 135
Introduction to
Root (:)
Commands
Root level commands control many of the basic operations of the instrument.
These commands are always recognized by the parser if they are prefixed with a
colon, regardless of current command tree position. After executing a root-level
command, the parser is positioned at the root of the command tree.
n/a :STATus? <display>
(see page 162)
{0 | 1}
<display> ::= {CHANnel<n> |
FUNCtion | MATH | FFT |
WMEMory<r> | ABUS}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
:STOP (see page 163) n/a n/a
n/a :TER? (see page 164) {0 | 1}
:VIEW <source> (see
page 165)
n/a <source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
Table 44 Root (:) Commands Summary (continued)
Command Query Options and Query Returns
To Next Page
Loading...
