:MTESt Commands 21
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 411
:MTESt:COUNt:RESet
(see page 798)
Command Syntax
:MTESt:COUNt:RESet
The :MTESt:COUNt:RESet command resets the mask statistics.
See Also • "Introduction to :MTESt Commands" on page 401
• ":MTESt:COUNt:WAVeforms" on page 413
• ":MTESt:COUNt:FWAVeforms" on page 410
• ":MTESt:COUNt:TIME" on page 412
To Next Page
Loading...
