:WAVeform Commands 28
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 641
:WAVeform:COUNt
(see page 798)
Query Syntax
:WAVeform:COUNt?
The :WAVeform:COUNT? query returns the count used to acquire the current
waveform. This may differ from current values if the unit has been stopped and its
configuration modified. For all acquisition types except average, this value is 1.
Return Format
<count_argument><NL>
<count_argument> ::= an integer from 1 to 65536 in NR1 format
See Also • "Introduction to :WAVeform Commands" on page 635
• ":ACQuire:COUNt" on page 180
• ":ACQuire:TYPE" on page 189
To Next Page
Loading...
