:WAVeform Commands 28
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 661
:WAVeform:VIEW
(see page 798)
Command Syntax
:WAVeform:VIEW <view>
<view> ::= {MAIN}
The :WAVeform:VIEW command sets the view setting associated with the currently
selected waveform. Currently, the only legal value for the view setting is MAIN.
Query Syntax
:WAVeform:VIEW?
The :WAVeform:VIEW? query returns the view setting associated with the currently
selected waveform.
Return Format
<view><NL>
<view> ::= {MAIN}
See Also • "Introduction to :WAVeform Commands" on page 635
• ":WAVeform:POINts" on page 645
To Next Page
Loading...
