:DVM Commands 13
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 247
:DVM:SOURce
(see page 798)
Command Syntax
:DVM:SOURce <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :DVM:SOURce command sets the select the analog channel on which digital
voltmeter (DVM) measurements are made.
The selected channel does not have to be on (displaying a waveform) in order for
DVM measurements to be made.
Query Syntax
:DVM:SOURce?
The :DVM:SOURce? query returns the selected DVM input source.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
<n> ::= 1 to (# analog channels) in NR1 format
See Also • ":DVM:ENABle" on page 244
• ":DVM:MODE" on page 246
• ":DVM:ARANge" on page 242
• ":DVM:CURRent" on page 243
• ":DVM:FREQuency" on page 245
To Next Page
Loading...
