158 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
6 Root (:) Commands
:PRINt
(see page 798)
Command Syntax
:PRINt [<options>]
<options>
::=
[<print
option>][,..,<
print
option>]
<print option> ::= {COLor | GRAYscale | PRINter0 | PRINter1 | BMP8bit
| BMP | PNG | NOFactors | FACTors}
The
<print
option>
parameter
may
be
repeated
up
to
5
times.
The PRINt command formats the output according to the currently selected
format (device). If an option is not specified, the value selected in the Print Config
menu is used.
See Also • "Introduction to Root (:) Commands" on page 135
• "Introduction to :HARDcopy Commands" on page 312
• ":HARDcopy:FACTors" on page 315
• ":HARDcopy:GRAYscale" on page 728
• ":DISPlay:DATA" on page 234
To Next Page
Loading...
