300 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
17 :FUNCtion Commands
:FUNCtion:GOFT:SOURce1
(see page 798)
Command Syntax
:FUNCtion:GOFT:SOURce1 <value>
<value> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :FUNCtion:GOFT:SOURce1 command selects the first input channel for the
g(t) source that can be used as the input to the FFT function.
Query Syntax
:FUNCtion:GOFT:SOURce1?
The :FUNCtion:GOFT:SOURce1? query returns the current selection for the first
input channel for the g(t) source.
Return Format
<value><NL>
<value> ::= CHAN<n>
<n> ::= 1 to (# analog channels) in NR1 format
See Also • "Introduction to :FUNCtion Commands" on page 291
• ":FUNCtion:GOFT:SOURce2" on page 301
• ":FUNCtion:GOFT:OPERation" on page 299
To Next Page
Loading...
