Keysight Technologies InfiniiVision DSOX1204G

632 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
27 :TRIGger Commands
:TRIGger:TV:STANdard
(see page 798)
Command Syntax
:TRIGger:TV:STANdard <standard>
<standard> ::= {NTSC | PALM | PAL | SECam}
The :TRIGger:TV:STANdard command selects the video standard:
•NTSC
•PAL
•PAL-M
•SECAM
Query Syntax
:TRIGger:TV:STANdard?
The :TRIGger:TV:STANdard? query returns the current TV trigger standard setting.
Return Format
<standard><NL>
<standard> ::= {NTSC | PALM | PAL | SEC}