Keysight Technologies InfiniiVision DSOX1204G

Root (:) Commands 6
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 163
:STOP
(see page 798)
Command Syntax
:STOP
The :STOP command stops the acquisition. This is the same as pressing the Stop
key on the front panel.
See Also • "Introduction to Root (:) Commands" on page 135
• ":RUN" on page 159
• ":SINGle" on page 161
Example Code • "Example Code" on page 159