292 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
17 :FUNCtion Commands
:FUNCtion:DISPlay
(see page 798)
Command Syntax
:FUNCtion:DISPlay <display>
<display> ::= {{1 | ON} | {0 | OFF}}
The :FUNCtion:DISPlay command turns the display of the function on or off. When
ON is selected, the function performs as specified using the other FUNCtion
commands. When OFF is selected, function is neither calculated nor displayed.
Query Syntax
:FUNCtion:DISPlay?
The :FUNCtion:DISPlay? query returns whether the function display is on or off.
Return Format
<display><NL>
<display> ::= {1 | 0}
See Also • "Introduction to :FUNCtion Commands" on page 291
• ":VIEW" on page 165
• ":BLANk" on page 142
• ":STATus" on page 162
To Next Page
Loading...
Need help?
General
