341
Keysight InfiniiVision DSOX1204A/G Oscilloscopes
Programmer's Guide
20 :MEASure Commands
Select automatic measurements to be made and control time markers. See
"Introduction to :MEASure Commands" on page 350.
Table 65 :MEASure Commands Summary
Command Query Options and Query Returns
:MEASure:ALL (see
page 352)
n/a n/a
:MEASure:BRATe
[<source>] (see
page 353)
:MEASure:BRATe?
[<source>] (see
page 353)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r> |
EXTernal}
<n> ::= 1 to (# of analog
channels) in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= bit rate in
Hz, NR3 format
:MEASure:CLEar (see
page 354)
n/a n/a
:MEASure:COUNter
[<source>] (see
page 355)
:MEASure:COUNter?
[<source>] (see
page 355)
<source> ::= {CHANnel<n> |
EXTernal}
<n> ::= 1 to (# analog channels)
in NR1 format
<return_value> ::= counter
frequency in Hertz in NR3 format
To Next Page
Loading...
