:WMEMory<r> Commands 30
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 707
:WMEMory<r>:SKEW
(see page 798)
Command Syntax
:WMEMory<r>:SKEW <skew>
<r> ::= 1-2 in NR1 format
<skew> ::= time in seconds in NR3 format
The :WMEMory<r>:SKEW command sets the skew factor for the specified
reference waveform.
Query Syntax
:WMEMory<r>:SKEW?
The :WMEMory<r>:SKEW? query returns the current skew setting for the selected
reference waveform.
Return Format
<skew><NL>
<skew> ::= time in seconds in NR3 format
See Also • Chapter 30, “:WMEMory<r> Commands,” starting on page 701
• ":WMEMory<r>:DISPlay" on page 704
• ":WMEMory<r>:YOFFset" on page 708
• ":WMEMory<r>:YRANge" on page 709
• ":WMEMory<r>:YSCale" on page 710
To Next Page
Loading...
