:SBUS<n> Commands 24
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 485
:SBUS<n>:IIC[:SOURce]:CLOCk
(see page 798)
Command Syntax
:SBUS<n>:IIC[:SOURce]:CLOCk <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :SBUS<n>:IIC[:SOURce]:CLOCk command sets the source for the IIC serial
clock (SCL).
Query Syntax
:SBUS<n>:IIC[:SOURce]:CLOCk?
The :SBUS<n>:IIC[:SOURce]:CLOCk? query returns the current source for the IIC
serial clock.
Return Format
<source><NL>
See Also • "Introduction to :TRIGger Commands" on page 585
• ":SBUS<n>:IIC[:SOURce]:DATA" on page 486
To Next Page
Loading...
