412 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
21 :MTESt Commands
:MTESt:COUNt:TIME
(see page 798)
Query Syntax
:MTESt:COUNt:TIME?
The :MTESt:COUNt:TIME? query returns the elapsed time in the current mask test
run.
Return Format
<time><NL>
<time> ::= elapsed seconds in NR3 format.
See Also • "Introduction to :MTESt Commands" on page 401
• ":MTESt:COUNt:WAVeforms" on page 413
• ":MTESt:COUNt:FWAVeforms" on page 410
• ":MTESt:COUNt:RESet" on page 411
Example Code • "Example Code" on page 401
To Next Page
Loading...
