:ACQuire Commands 8
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 181
:ACQuire:MODE
(see page 798)
Command Syntax
:ACQuire:MODE <mode>
<mode> ::= {RTIMe | SEGMented}
The :ACQuire:MODE command sets the acquisition mode of the oscilloscope.
• The :ACQuire:MODE RTIMe command sets the oscilloscope in real time mode.
• The :ACQuire:MODE SEGMented command sets the oscilloscope in segmented
memory mode.
Segmented memory is available on the DSOX1000-Series oscilloscope models.
Query Syntax
:ACQuire:MODE?
The :ACQuire:MODE? query returns the acquisition mode of the oscilloscope.
Return Format
<mode_argument><NL>
<mode_argument> ::= {RTIM | SEGM}
See Also • "Introduction to :ACQuire Commands" on page 177
• ":ACQuire:TYPE" on page 189
The obsolete command ACQuire:TYPE:REALtime is functionally equivalent to sending
ACQuire:MODE RTIMe; TYPE NORMal.
To Next Page
Loading...
