Keysight Technologies InfiniiVision DSOX1204G User Manual

234 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
12 :DISPlay Commands
:DISPlay:DATA
(see page 798)
Query Syntax
:DISPlay:DATA? [<format>][,][<palette>]
<format> ::= {BMP | BMP8bit | PNG}
<palette> ::= {COLor | GRAYscale}
The :DISPlay:DATA? query reads screen image data. You can choose 24-bit BMP,
8-bit BMP8bit, or 24-bit PNG formats in color or grayscale.
If no format or palette option is specified, the screen image is returned in BMP,
COLor format.
Screen image data is returned in the IEEE-488.2 # binary block data format.
Return Format
<display data><NL>
<display data> ::= binary block data in IEEE-488.2 # format.
See Also • "Introduction to :DISPlay Commands" on page 228
• ":HARDcopy:INKSaver" on page 317
• ":PRINt" on page 158
• "*RCL (Recall)" on page 120
• "*SAV (Save)" on page 124
• ":VIEW" on page 165
Example Code
' IMAGE_TRANSFER - In this example, we will query for the image data
' with ":DISPlay:DATA?", read the data, and then save it to a file.
Dim byteData() As Byte
myScope.IO.Timeout = 15000
myScope.WriteString ":DISPlay:DATA? BMP, COLOR"
byteData = myScope.ReadIEEEBlock(BinaryType_UI1)
' Output display data to a file:
strPath = "c:\scope\data\screen.bmp"
' Remove file if it exists.
If Len(Dir(strPath)) Then
Kill strPath
End If
Close #1 ' If #1 is open, close it.
Open strPath For Binary Access Write Lock Write As #1 ' Open file f
or output.
Put #1, , byteData ' Write data.
Close #1 ' Close file.
myScope.IO.Timeout = 5000
See complete example programs at: Chapter 36, “Programming Examples,”
starting on page 807

Keysight Technologies InfiniiVision DSOX1204G Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision DSOX1204G
Category	Test Equipment
Language	English