706 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
30 :WMEMory<r> Commands
:WMEMory<r>:SAVE
(see page 798)
Command Syntax
:WMEMory<r>:SAVE <source>
<r> ::= 1-2 in NR1 format
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1 to (# analog channels) in NR1 format
The :WMEMory<r>:SAVE command copies the analog channel or math function
waveform to the specified reference waveform location.
See Also • Chapter 30, “:WMEMory<r> Commands,” starting on page 701
• ":WMEMory<r>:DISPlay" on page 704
Only ADD or SUBtract math operations can be saved as reference waveforms.
To Next Page
Loading...
