:SAVE Commands 23
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 459
:SAVE:WMEMory:SOURce
(see page 798)
Command Syntax
:SAVE:WMEMory:SOURce <source>
<source> ::= {CHANnel<n> | FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<r> ::= {1 | 2}
The :SAVE:WMEMory:SOURce command selects the source to be saved as a
reference waveform file.
Query Syntax
:SAVE:WMEMory:SOURce?
The :SAVE:WMEMory:SOURce? query returns the source to be saved as a
reference waveform file.
Return Format
<source><NL>
<source> ::= {CHAN<n> | FUNC | WMEM<r> | NONE}
See Also • "Introduction to :SAVE Commands" on page 442
• ":SAVE:WMEMory[:STARt]" on page 460
• ":RECall:WMEMory<r>[:STARt]" on page 439
Only ADD or SUBtract math operations can be saved as reference waveforms.
MATH is an alias for FUNCtion. The query will return FUNC if the source is FUNCtion or MATH.
To Next Page
Loading...
