:SYSTem Commands 25
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 565
:SYSTem:RLOGger:TRANsparent
(see page 798)
Command Syntax
:SYSTem:RLOGger:TRANsparent {{0 | OFF} | {1 | ON}}
The :SYSTem:RLOGger:TRANsparent command specifies whether the screen
display background for remote command logging is transparent or solid.
Query Syntax
:SYSTem:RLOGger:TRANsparent?
The :SYSTem:RLOGger:TRANsparent? query returns the setting for transparent
screen display background.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also • ":SYSTem:RLOGger" on page 560
• ":SYSTem:RLOGger:DESTination" on page 561
• ":SYSTem:RLOGger:DISPlay" on page 562
• ":SYSTem:RLOGger:FNAMe" on page 563
• ":SYSTem:RLOGger:STATe" on page 564
• ":SYSTem:RLOGger:WMODe" on page 566
To Next Page
Loading...
