Keysight Technologies InfiniiVision DSOX1204G

112 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
5 Common (*) Commands
*ESE (Standard Event Status Enable)
(see page 798)
Command Syntax
*ESE <mask_argument>
<mask_argument> ::= integer from 0 to 255
The *ESE common command sets the bits in the Standard Event Status Enable
Register. The Standard Event Status Enable Register contains a mask value for the
bits to be enabled in the Standard Event Status Register. A "1" in the Standard
Event Status Enable Register enables the corresponding bit in the Standard Event
Status Register. A zero disables the bit.
To ESB bit in
Status Byte
Register
Standard Event
Status Enable
(Mask) Register
Standard Event
Status Register
*ESR?
*ESE
*ESE?
PON URQ EXE DDE QYE RQL OPCCM E

OR
10234567
128 64 16 8 4 2 132