:FUNCtion Commands 17
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 307
:FUNCtion:SCALe
(see page 798)
Command Syntax
:FUNCtion:SCALe <scale value>[<suffix>]
<scale value> ::= integer in NR1 format
<suffix> ::= {V | dB}
The :FUNCtion:SCALe command sets the vertical scale, or units per division, of the
selected function. Legal values for the scale depend on the selected function.
Query Syntax
:FUNCtion:SCALe?
The :FUNCtion:SCALe? query returns the current scale value for the selected
function.
Return Format
<scale value><NL>
<scale value> ::= integer in NR1 format
See Also • "Introduction to :FUNCtion Commands" on page 291
• ":FUNCtion:RANGe" on page 305
To Next Page
Loading...
