Keysight Technologies InfiniiVision DSOX1204G

:WGEN Commands 29
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 677
:WGEN:FUNCtion:RAMP:SYMMetry
(see page 798)
Command Syntax
:WGEN:FUNCtion:RAMP:SYMMetry <percent>
<percent> ::= symmetry percentage from 0% to 100% in NR1 format
For Ramp waveforms, the :WGEN:FUNCtion:RAMP:SYMMetry command specifies
the symmetry of the waveform.
Symmetry represents the amount of time per cycle that the ramp waveform is
rising.
Query Syntax
:WGEN:FUNCtion:RAMP:SYMMetry?
The :WGEN:FUNCtion:RAMP:SYMMetry? query returns the currently set ramp
symmetry.
Return Format
<percent><NL>
<percent> ::= symmetry percentage from 0% to 100% in NR1 format
See Also • "Introduction to :WGEN Commands" on page 671
• ":WGEN:FUNCtion" on page 673