Keysight Technologies InfiniiVision DSOX1204G

346 Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide
20 :MEASure Commands
:MEASure:SDEViation
[<source>] (see
page 378)
:MEASure:SDEViation?
[<source>] (see
page 378)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= calculated
std deviation in NR3 format
:MEASure:SHOW {1 |
ON} (see page 379)
:MEASure:SHOW? (see
page 379)
{1}
:MEASure:SOURce
<source1>
[,<source2>] (see
page 380)
:MEASure:SOURce? (see
page 380)
<source1,2> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r> |
EXTernal}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= {<source> |
NONE}
n/a :MEASure:TEDGe?
<slope><occurrence>[,
<source>] (see
page 382)
<slope> ::= direction of the
waveform
<occurrence> ::= the transition
to be reported
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r> |
EXTernal}
<n> ::= 1 to (# analog channels)
in NR1 format
<r> ::= 1-2 in NR1 format
<return_value> ::= time in
seconds of the specified
transition
Table 65 :MEASure Commands Summary (continued)
Command Query Options and Query Returns