Keysight Technologies InfiniiVision DSOX1204G

Commands Quick Reference 4
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 69
:MARKer:Y2Position
<position>[suffix]
(see page 337)
:MARKer:Y2Position?
(see page 337)
<position> ::= Y2 cursor position
value in NR3 format
[suffix] ::= {V | mV | dB}
<return_value> ::= Y2 cursor
position value in NR3 format
n/a :MARKer:YDELta? (see
page 338)
<return_value> ::= Y cursors
delta value in NR3 format
:MARKer:YUNits <mode>
(see page 339)
:MARKer:YUNits? (see
page 339)
<units> ::= {BASE | PERCent}
:MARKer:YUNits:USE
(see page 340)
n/a n/a
Table 16 :MARKer Commands Summary (continued)
Command Query Options and Query Returns
Table 17 :MEASure Commands Summary
Command Query Options and Query Returns
:MEASure:ALL (see
page 352)
n/a n/a
:MEASure:BRATe
[<source>] (see
page 353)
:MEASure:BRATe?
[<source>] (see
page 353)
<source> ::= {CHANnel<n> |
FUNCtion | MATH | WMEMory<r> |
EXTernal}
<n> ::= 1 to (# of analog
channels) in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= bit rate in
Hz, NR3 format
:MEASure:CLEar (see
page 354)
n/a n/a
:MEASure:COUNter
[<source>] (see
page 355)
:MEASure:COUNter?
[<source>] (see
page 355)
<source> ::= {CHANnel<n> |
EXTernal}
<n> ::= 1 to (# analog channels)
in NR1 format
<return_value> ::= counter
frequency in Hertz in NR3 format