Obsolete and Discontinued Commands 31
Keysight InfiniiVision DSOX1204A/G Oscilloscopes Programmer's Guide 715
Discontinued
Parameters
Some previous oscilloscope queries returned control setting values of OFF and ON.
The InfiniiVision DSOX1204A/G oscilloscopes only return the enumerated values 0
(for off) and 1 (for on).
HARDcopy:ADDRess none Only parallel printer port is
supported. GPIB printing not
supported
MASK none All commands discontinued,
feature not available
SYSTem:KEY none
TEST:ALL *TST (Self Test) (see
page 130)
TRACE subsystem none All commands discontinued,
feature not available
TRIGger:ADVanced subsystem Use new GLITch, PATTern, or TV
trigger modes
TRIGger:TV:FIELd :TRIGger:TV:MODE (see
page 629)
TRIGger:TV:TVHFrej
TRIGger:TV:VIR none
VAUToscale none
Discontinued Command Current Command Equivalent Comments
To Next Page
Loading...
