Planet WGSW-28040 Command Guide

Command Guide of WGSW-28040
37
Parameter:
LISTNAME
Specify the login authentication list name to use.
Default:
Default login authentication list for each line is “default”.
Mode:
Line Configuration
Usage Guide:
Different access methods are allowed to bind different login authentication lists. Use “login authentication”
command to bind the list to specific line (console, telnet, ssh).
Use no form to bind the “default” list back.
Example:
This example shows how to create a new login authentication list and bind to telnet line.
Switch(config)# aaa authentication login test1 tacacs+ radius local
Switch(config)# line telnet
Switch(config-line)# login authentication test1
This example shows how to show line binding lists.
Switch# show line lists
Line Type | AAA Type | List Name
-------------+-----------------+-----------------
console | login | default
| enable | default
| exec | default
| commands | default
| accounting-exec | default
telnet | login | test1
| enable | default
| exec | default
| commands | default
| accounting-exec | default
ssh | login | default
| enable | default
| exec | default
| commands | default
| accounting-exec | default

Planet WGSW-28040 Specifications

General

Brand	Planet
Model	WGSW-28040
Category	Switch
Language	English