Command Guide of WGSW-28040
60
router-solicitation|router-advertisement|nd-ns|nd-na|any)
(<0-255>|any)[(dscp|precedence) VALUE]
[sequence <1-2147483647>] permit tcp (X:X::X:X/<0-128>|any)
(<0-65535>|echo|discard|daytime|ftp-data|ftp|telnet|smtp|
time|hostname|whois|tacacs-ds|domain|www|pop2|pop3|syslog|
talk|klogin|kshell|sunrpc|drip|PORT_RANGE|any) (X:X::X:X/<0-128>|any)
(<0-65535>|echo|discard|daytime|ftp-data|ftp|
telnet|smtp|time|hostname|whois|tacacs-ds|domain|www|pop2|
pop3|syslog|talk|klogin|kshell|sunrpc|drip|PORT_RANGE|any) [match-all
TCP_FLAG] [(dscp|precedence) VALUE]
[sequence <1-2147483647>] permit udp (X:X::X:X/<0-128>|any)
(<0-65535>|echo|discard|time|nameserver|tacacs-ds|domain|
bootps|bootpc|tftp|sunrpc|ntp|netbios-ns|snmp|snmptrap|who|syslog|
talk|rip|PORT_RANGE|any) (X:X::X:X/<0-128>|any)
(<0-65535>|echo|discard|time|nameserver|tacacs-ds|domain|
bootps|bootpc|tftp|sunrpc|ntp|netbios-ns|
snmp|snmptrap|who|syslog|PORT_RANGE|any) [(dscp|precedence) VALUE]
no sequence <1-2147483647>
Parameter:
<1-2147483647>
(Optional) Specify sequence index of ACE, the sequence index represent the priority of
(X:X::X:X/<0-128>|a
Specify the source IPv6 address and prefix of packet or any IPv6 address.
(X:X::X:X/<0-128>|a
Specify the destination IPv6 address and prefix of packet or any IPv6 address.
(Optional) Specify the DSCP of packet.
[precedence
(Optional) Specify the IP precedence of packet.
icmp-type
Specify ICMP message type for filtering ICMP packet. Enter a type name of list or a
number of ICMP message type.
Specify ICMP message code for filtering ICMP packet.
l4-source-port
Specify TCP/UDP source port of for filtering TCP/UDP packet. Enter a port name of list
or a number of TCP/UDP port.
Specify TCP/UDP destination port of for filtering TCP/UDP packet. Enter a port name of
To Next Page
Loading...
Need help?
General