System SP1-xxx
D086/D087 3-20 SM Appendix
1114 [Heat Storage Status]
001
Temp.:Threshold:Press *ENG
[0 to 200 / 80 / 1 deg/step]
Specifies the threshold temperature of the pressure roller for the heat storage
status.
002
Temp.:Threshold:Atmosphere *ENG
[0 to 200 / 60 / 1 deg/step]
Specifies the threshold temperature inside the machine for the heat storage
feedback control.
1115 [Target Temp. Correction]
001
Temp.:Delta:End *ENG
[-100 to 100 / 0 / 1 deg/step]
Specifies the different temperature between end and center of the heating
roller.
1116 [Heat Storage FB Control]
001
Execution mode *ENG
[0 to 2 / 1 / 1 /step]
0: OFF, 1: ON (BW), 2: ON (BW/FC)
Selects the heat storage FB control mode.
011
Time Out *ENG
[0 to 500 / 5 / 1 sec/step]
Specifies the no-entry time for the heat strorage FB control after the LD units
have fired.
021
Delay:Standard
Speed:FC:1
*ENG
[0 to 20,000 / 3500 / 1 msec/step]
022
Delay:Standard
Speed:BW:1
*ENG
[0 to 20,000 / 1400 / 1 msec/step]
031
Delay:Standard
Speed:FC:2
*ENG
[0 to 20,000 / 3500 / 1 msec/step]
032
Delay:Standard
Speed:BW:2
*ENG
[0 to 20,000 / 1400 / 1 msec/step]
To Next Page
Loading...
