Input and Output Check
SM Appendix 3-405 D086/D087
Appendix:
SP Mode
Tables
Table 2: Paper Size Switch (Tray 2)
Switch 1 is used for tray set detection.
0: Pushed, 1: Not pushed
Models Switch Location
North America Europe/Asia 4 (bit0) 3 (bit1) 2 (bit2)
11" x 17" SEF
*1
(A3 SEF)
A3 SEF
*1
(11" x 17" SEF)
0 0 1
8.5" x 14" SEF
*2
(B4 SEF)
B4 SEF
*2
(8.5" x 14" SEF)
0 0 0
A4 SEF A4 SEF 1 1 0
8.5" x 11" SEF 8.5" x 11" SEF 1 1 1
B5 SEF B5 SEF 0 1 1
11" x 81/2" LEF
*3
(A4 LEF)
A4 LEF
*3
(11" x 81/2" LEF)
1 0 0
10.5" x 7.25" LEF
*4
(B5 LEF)
B5 LEF
*4
(10.5" x 7.25" LEF)
0 1 0
A5 LEF A5 LEF 1 0 1
*1: The machine detects either 11" x 17" SEF or A3 SEF, depending on the setting of SP
5-181-003.
*2: The machine detects either 8.5" x 14" SEF or B4 SEF, depending on the setting of SP
5-181-004.
*3: The machine detects either 11" x 81/2" LEF or A4 LEF, depending on the setting of SP
5-181-002.
*4: The machine detects either B5 LEF or 10.5" x 7.25" LEF, depending on the setting of
SP 5-181-005.
To Next Page
Loading...
