System SP1-xxx
SM Appendix 3-3 D086/D087
Appendix:
SP Mode
Tables
008 Tray 2/3/4/5/LCT: Middle Thick *ENG
[–9 to 5 / -1 / 1 mm/step]
009
Paper Tray2/3/4/5/LCT: Thick
1
*ENG
[–9 to 5 / -2 / 1 mm/step]
012 By-pass: Plain *ENG
[–9 to 5 / 0 / 1 mm/step]
013 By-pass: Middle Thick *ENG
014 By-pass: Thick 1 *ENG
[–9 to 5 / -2 / 1 mm/step]
018 Duplex: Plain *ENG
[–9 to 5 / 0 / 1 mm/step]
019 Duplex: Middle Thick *ENG
020 Duplex: Thick 1 *ENG
[–9 to 5 / -2 / 1 mm/step]
021 Paper Tray1: Plain: 1200 *ENG
[–9 to 5 / 0 / 1 mm/step]
022 Tray1: Middle Thick: 1200 *ENG
023 Tray 2/3/4/5LCT: Plain: 1200 *ENG
024 Tray 2/3/4/5LCT: Mid: 1200 *ENG
025 By-pass: Plain: 1200 *ENG
026 By-pass: Middle Thick: 1200 *ENG
030 Duplex: Plain: 1200 *ENG
[–9 to 5 / 0 / 1 mm/step]
031 Duplex: Middle Thick: 1200 *ENG
1007 [By-Pass Size Detection] By-Pass Size Detection Display
001
LG *ENG
[0 or 1 / 0 / 1 ]
0: OFF, 1: ON
Enables or disables the automatic paper size detection function of the by-pass
tray.
This SP determines what paper size the machine detects if the detected size is
less than 8.5".
0: OFF (Letter/SEF), 1: ON (Legal/SEF)
To Next Page
Loading...
