Rohde & Schwarz MXO 4 Series - Page 241

MeasurementsMXO 4 Series
241User Manual 1335.5337.02 ─ 07
Spectrum on track
Figure 9-8: Track and spectrum on track, C1 is not in diagram
The example is set up as follows:
●
Waveform on channel 1
●
Period measurement on C1
●
Enable track for the period measurement: Track 1
●
Spectrum with "Source" = Track 1
●
Enable "PeakList" > "Peak on waveform"
Automatic measurements