Rohde & Schwarz MXO 4 Series - Page 327

Protocol analysisMXO 4 Series
327User Manual 1335.5337.02 ─ 07
"Field"
Enables the field type that you want to filter on for the selected frame.
The available fields are "MOSI Pattern" and "MISO Pattern".
Remote command:
SBUS<sb>:SPI:FILTer:FIENable on page 717
SBUS<sb>:SPI:FILTer:FRAMe<fr>:FLD<fl>:ENABle
on page 717
"Condition"
Displays the value condition for the selected field.
Remote command:
SBUS<sb>:SPI:FILTer:FRAMe<fr>:FLD<fl>:BIT on page 715
"Data"
The data setup consists of a comparison condition and one or two
data patterns.
Remote command:
SBUS<sb>:SPI:FILTer:FRAMe<fr>:FLD<fl>:DMAX
on page 716
SBUS<sb>:SPI:FILTer:DMAX on page 716
SBUS<sb>:SPI:FILTer:FRAMe<fr>:FLD<fl>:DMIN
on page 716
SBUS<sb>:SPI:FILTer:DMIN on page 716
SBUS<sb>:SPI:FILTer:FRAMe<fr>:FLD<fl>:DOPerator
on page 716
SBUS<sb>:SPI:FILTer:DOPerator on page 716
SPI bus (option R&S MXO4-K510)