Rohde & Schwarz MXO 4 Series - Page 343

Protocol analysisMXO 4 Series
343User Manual 1335.5337.02 ─ 07
For each frame type, you can also specify conditions for the value of the fields in the
"Edit" dialog.
Remote command:
SBUS<sb>:I2C:FILTer:FRENable on page 735
SBUS<sb>:I2C:FILTer:FRAMe<fr>:ENABle on page 735
Edit
Opens a dialog to define the details of the selected frame.
"Field"
Enables the field type that you want to filter on for the selected frame.
The available fields are "Address", "R/W", "ACK_A", "Data", and
"ACK_D".
Remote command:
SBUS<sb>:I2C:FILTer:FRAMe<fr>:FLD<fl>:ENABle
on page 738
SBUS<sb>:I2C:FILTer:FIENable on page 738
"Condition"
Displays the value condition for the selected field.
Remote command:
SBUS<sb>:I2C:FILTer:FRAMe<fr>:FLD<fl>:BIT on page 737
I²C (option R&S MXO4-K510)