Rohde & Schwarz MXO 4 Series - Page 785

Remote control commandsMXO 4 Series
785User Manual 1335.5337.02 ─ 07
Usage: Query only
Asynchronous command
SBUS<sb>:CAN:FRAMe<fr>:CSValue?
Returns the CRC sequence value of the selected frame.
Suffix:
<sb>
.
1...4, index of the serial bus
<fr> index of the frame
Return values:
<ChecksumValue> Range: 0 to 4294967295
Increment: 1
*RST: 0
Usage: Query only
Asynchronous command
SBUS<sb>:CAN:FRAMe<fr>:DATA?
Returns the data of the specified frame.
Suffix:
<sb>
.
1...4, index of the serial bus
<fr> index of the frame
Return values:
<FrameData> Comma-separated list of values. The first value is the number of
bytes, followed by the values of the data bytes.
Example:
BUS1:CAN:FRAMe2:DATA?
--> 3,208,231,32
Returns the data of the second frame: the number of bytes is 3
data (first value).
Usage: Query only
SBUS<sb>:CAN:FRAMe<fr>:DLCState?
Return the states of the state of data length code.
Suffix:
<sb>
.
1...4, index of the serial bus
<fr> index of the frame
Return values:
<FrameDLCState> OK | ERRor | UNDF
*RST: OK
Usage: Query only
Asynchronous command
Protocols