Rohde & Schwarz RTE Series - Hierarchy of Status Registers; Remote Control - Status Reporting System

Network operation and remote control
R&S
®
RTE
1046User Manual 1326.1032.02 ─ 20
17.5.4 Remote control - status reporting system
The status reporting system stores all information on the current operating state of the
instrument, and on errors which have occurred. This information is stored in the status
registers and in the error queue. Both can be queried via STATus... commands.
17.5.4.1 Hierarchy of status registers
As shown in the following figure, the status information is of hierarchical structure.
Figure 17-3: Overview of the status registers hierarchy
All status registers have the same internal structure.
Remote control