Remote control commands
R&S
®
RTE
1524User Manual 1326.1032.02 ─ 20
Return values:
<FrameStop> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:CAN:FRAMe<m>:SYMBol? <SearchName>
Returns the symbolic label of the specified frame if the label list is enabled.
Suffix:
<m>
.
*
Selects the number of the frame in the current acquisition, 1...n.
Query parameters:
<SearchName> String parameter that contains the search definition name
Return values:
<Label> Symbolic label (string)
Usage: Query only
SEARch:RESult:CAN:FRAMe<m>:TYPE? <SearchName>
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<FrameType> DATA | REMote | ERR | OVLD
*RST: DATA
Usage: Query only
18.17.6.6 Symbolic trigger, decode and search
● Symbolic trigger.................................................................................................. 1524
● Symbolic decode results..................................................................................... 1526
● Symbolic search..................................................................................................1526
Symbolic trigger
TRIGger<m>:CAN:SYMBolic:MSGValue........................................................................ 1525
TRIGger<m>:CAN:SYMBolic:TSIGnals.......................................................................... 1525
TRIGger<m>:CAN:SYMBolic:SIGValue.......................................................................... 1525
TRIGger<m>:CAN:SYMBolic:DMAX.............................................................................. 1525
TRIGger<m>:CAN:SYMBolic:DMIN............................................................................... 1525
TRIGger<m>:CAN:SYMBolic:SGEValue.........................................................................1526
Protocols