Rohde & Schwarz RTE Series - Digital Channels; Mixed Signal Option (MSO, R&S RTE-B1)

Remote control commands
R&S
®
RTE
1900User Manual 1326.1032.02 ─ 20
SEARch:RESult:CXPI:FRAMe<m>:WORD<n>:VALue? <SearchName>
Suffix:
<m>
.
*
<n> *
Query parameters:
<SearchName>
Return values:
<WordValue> Range: 0 to 65535
Increment: 1
*RST: 0
Usage: Query only
18.18
Mixed signal option (MSO, R&S RTE-B1)
This chaptes decribes the remote commands of MSO option R&S RTE-B1.
Some of the commands in the following chapter are asynchronous. An overlapping or
asynchronous command does not automatically finish executing before the next com-
mand starts executing. If overlapping commands must be executed in a defined order,
e.g. to avoid wrong measurement results, they must be serviced sequentially.
To prevent an overlapping execution of commands, one of the commands *OPC,
*OPC? or *WAI can be used after the command or a command set.
For more information, see:
●
www.rohde-schwarz.com/rc-via-scpi, chapter "Command Sequence and Synchro-
nization"
●
Chapter 18.3, "Programming examples", on page 1054
● Digital channels...................................................................................................1900
● Parallel bus configuration....................................................................................1903
● Digital resolution..................................................................................................1910
● Trigger settings for digital signals and parallel buses..........................................1911
● MSO data............................................................................................................1921
18.18.1 Digital channels
All DIGital: commands affect only the settings of the first MSO bus (Bus1). The set-
tings of all other parallel buses (Bus 2, 3,4) remain unchanged.
DIGital<m>:DISPlay..................................................................................................... 1901
DIGital<m>:TECHnology...............................................................................................1901
DIGital<m>:THReshold.................................................................................................1901
DIGital<m>:THCoupling................................................................................................1902
Mixed signal option (MSO, R&S
RTE-B1)