Protocol analysis
R&S
®
RTE
651User Manual 1326.1032.02 ─ 20
2. Select the decode results you want to export, the file format, and the delimiter.
3. Tap "Save" or "Save as".
Remote commands
Remote commands are described in Chapter 18.17.9.3, "Decode results",
on page 1601.
13.8.5 Track
The track is a waveform that shows measurement values in time-correlation to the
audio signal. It is the graphical interpretation of all measurement values of a single
acquisition. For audio signals, the measurement values on the vertical axis are the
decoded values of the audio channels, the time scale is equivalent to the scale of the
source waveforms.
You can display the values of several channels in one track, or create one track for
each channel and display them in parallel.
Figure 13-41: Tracks of left and right channel of I²S standard signal
The track is a special measurement waveform, so it can be used for further analysis
like cursor measurements and zoom.
Audio signals (option R&S
RTE-K5)
To Next Page
Loading...
