Rohde & Schwarz RTE Series - Clear Results

Remote control commands
R&S
®
RTE
1105User Manual 1326.1032.02 ─ 20
Example:
:DISPlay:SIGNal:LABel:POSMode C2W1, ABS
DISPlay:SIGNal:LABel:HORizontal:ABSolute:POSition 'Label1', C2W1, 5e-09
DISPlay:SIGNal:LABel:VERTical:ABSolute:POSition 'Label1', C2W1, -0.1
Move the label to 5 ns and -0.1 V.
DISPlay:SIGNal:LABel:HORizontal:RELative:POSition <LabelID>, <Source>,
<Position>
DISPlay:SIGNal:LABel:HORizontal:RELative:POSition? <LabelID>, <Source>
DISPlay:SIGNal:LABel:VERTical:RELative:POSition <LabelID>, <Source>,
<Position>
DISPlay:SIGNal:LABel:VERTical:RELative:POSition? <LabelID>, <Source>
Modifies or queries the relative horizontal and vertical positiions of the specified label if
DISPlay:SIGNal:LABel:POSMode is set to REL.
Parameters:
<Position> Position in percent of the screen counting from the upper left
corner.
Range: 0 to 100
Default unit: %
Parameters for setting and query:
<LabelID> String with the label identifier.
<Source> All waveforms that can be displayed, see DISPlay:SIGNal:
LABel:ADD
Example:
:DISPlay:SIGNal:LABel:POSMode C2W1, REL
DISPlay:SIGNal:LABel:HORizontal:RELative:POSition 'Label1', C2W1, 30
DISPlay:SIGNal:LABel:VERTical:RELative:POSition 'Label1', C2W1, 70
Move the label to new relative position: horizontal at 30 % and
vertical at 70 % of the screen.
DISPlay:SIGNal:LABel:FONTsize <Fontsize>
Sets the font size of waveform labels.
Parameters:
<Fontsize> Range: 7 to 30
Increment: 1
*RST: 15
Usage: Asynchronous command
18.7.2.6 Clear results
DISPlay:CLR
Deletes all measurement results including long term measurement and statistics, all
waveforms, and the history.
Instrument setup