Rohde & Schwarz RTE Series - Layout

Power analysis (option R&S RTE-K31)
R&S
®
RTE
961User Manual 1326.1032.02 ─ 20
Directory
Selects the directory, from which previous report results are inserted into the report
table. You can use this directory to insert previously recorded report data into the cur-
rent report.
Remote command:
POWer:REPort:TEST:DIRectory on page 1950
Report Path
Enter the file name to load or to save the report to, and select the file format with the
format button on the right.
"Load"
Loads the most recently created report with the Windows default
viewer application for the pdf/rtf file format.
"Open"
Opens a file selection dialog box and loads the selected file.
"Save"
Saves the data to the selected file.
"Save As..."
Opens the file selection dialog box and saves the data to the selected
file.
".pdf/.rtf"
Selects the file format.
"New"
Creates a new file.
"Delete"
Deletes the selected file.
Remote command:
POWer:REPort:FILE:DELete on page 1948
POWer:REPort:FILE:NAME on page 1948
POWer:REPort:FILE:NEW on page 1948
POWer:REPort:FILE:SAVE on page 1948
Layout
In this tab, you can set up a layout for your report.
Power measurement selection