Rohde & Schwarz RTE Series - Reports

Remote control commands
R&S
®
RTE
1417User Manual 1326.1032.02 ─ 20
Return values:
<PrinterName> If no printer is configured an empty string is returned.
Usage: Query only
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]?
Queries the name of the next printer that is configured in the Windows operating sys-
tem.
Before you send the ...NEXT command, send SYSTem:COMMunicate:PRINter:
ENUMerate:FIRSt? to return to the beginning of the printer list and query the name
of the first printer.
Return values:
<PrinterName> After all available printer names have been returned, an empty
string enclosed by quotation marks (") is returned for the next
query. Further queries are answered by a query error.
Usage: Query only
SYSTem:COMMunicate:PRINter:SELect<1..2> <PrinterName>
Selects a configured printer.
Parameters:
<PrinterName> Enter the string as it is returned with SYSTem:COMMunicate:
PRINter:ENUMerate:FIRSt? or SYSTem:COMMunicate:
PRINter:ENUMerate[:NEXT]?.
18.16.11 Reports
The following commands configure and save report files. To configure the screenshot
that is included in the report, use the commands explained in Chapter 18.16.10,
"Screenshots", on page 1412.
REPort:LANGuage.......................................................................................................1417
REPort:PAPersize........................................................................................................1418
REPort:LOGType.........................................................................................................1418
REPort:LOGO..............................................................................................................1418
REPort:USER..............................................................................................................1418
REPort:COMMent........................................................................................................ 1419
REPort:FILE:NAME......................................................................................................1419
REPort:FILE:SAVE.......................................................................................................1419
REPort:LANGuage <Language>
Sets the language to be used in the report. Available languages are listed in the data
sheet.
Data management