Rohde & Schwarz RTE Series - Spectrum Analysis (Option R&S RTE-K18)

Remote control commands
R&S
®
RTE
1329User Manual 1326.1032.02 ─ 20
CALCulate:MATH<m>:DATA[:VALues]?
Returns the data of the math waveform points for transmission from the instrument to
the controlling computer. The data can be used in MATLAB, for example.
To set the export format, use FORMat[:DATA].
You can retrieve only Y-values, or X- and Y-values. Use EXPort:WAVeform:
INCXvalues to define this.
Suffix:
<m>
.
1..8
Selects the math waveform.
Return values:
<Data> List of values according to the format and content settings.
Usage: Query only
18.13.3
Spectrum Analysis (option R&S RTE-K18)
In all CALC:MATH<m>:FFT commands, the suffix <m> selects the math waveform.
In all CALC:MATH<m>:FFT:SPEC:TIM commands, the suffix <m> selects the timeline.
CALCulate:MATH<m>:FFT:SPECtrogram:CMODe.......................................................... 1329
CALCulate:MATH<m>:FFT:USEColtab...........................................................................1330
CALCulate:MATH<m>:FFT:SPECtrogram:STATe.............................................................1330
CALCulate:MATH<m>:FFT:SPECtrogram:TIMeline<n>:POSition...................................... 1330
CALCulate:MATH<m>:FFT:SPECtrogram:TIMeline<n>:STATe..........................................1331
CALCulate:MATH<m>:FFT:SPECtrogram:CMODe <ColorTableMode>
Selects the color table mode for the frequency analysis display.
Suffix:
<m>
.
1..8
Parameters:
<ColorTableMode> INCI | AMPL
INCI
("Incidence") The display color is set depending on the fre-
quency of occurrence of a value.
AMPL
("Amplitude") In the spectrogram and the frequency analysis dis-
play, the color is used to indicate the magnitude of the FFT sig-
nal. The higher the amplitude the higher the color in the
assigned color table.
*RST: INCI
Usage: Asynchronous command
Spectrum analysis