Waveform analysis
R&S
®
RTE
313User Manual 1326.1032.02 ─ 20
"Play" button. Closing the quick-access "History" dialog box, or starting a new acquisi-
tion disables the history mode.
Export of history waveforms
You can export history data, see "To save the history data" on page 317.
7.4.2 History setup
The "History" dialog box contains the complete functionality on history viewing and
information. The most important information and functions are also provided in the
quick-access history dialog box.
7.4.2.1 Viewer
The settings in the "Viewer" tab control the display of history waveforms.
The numbering of the waveforms refers to the current memory content. With every
[RUN CONT] or [RUN N× SINGLE] action, the memory content changes.
Show history / Export history
Enables the history mode and allows you to save history waveforms to file.
The history display is enabled automatically when you press the [HISTORY] button. It
is disabled when you close the quick-access "History" dialog box.
For details on data export, see "Export history" on page 487.
Remote command:
CHANnel<m>[:WAVeform<n>]:HISTory[:STATe] on page 1231
Current acq
Accesses a particular acquisition in the memory to display it, or to save it. The newest
acquisition always has the index "0". Older acquisition have a negative index.
History
To Next Page
Loading...
